Caravan Bubble for Outside - Product Information

After hard weeks work, we all look forward to weekends where we can unwind and relax. Requiring very little notice time when booking and before heading away, the caravan / motorhome short brake holidays are becoming more and more popular.

With the customer expectations driving up the standard in finish and user satisfaction, the manufacturers are working harder and harder in developing and bringing in products to the market that allow them to be distinguish from competition as being most comfortable, efficient, best finished and most competitive. The extra cost increase in quality of materials and labour used to manufacture such vehicles is inevitably reflected in retail price.

With purchase prices of caravans touching £40 and motorhomes £100 thousand pounds, it has become an investment in to lifestyle. 

With majority of owners living in towns where parking is becoming an issue the leisure vehicles are put in to open air storage during cold winter time.

Does it then make sense to leave your investment outside, open to elements?

The harmful conditions through winter months such as Sun UV rays combined with rain and cold weather are the key factors contributing to premature ageing and component failure on most caravans and motorhomes. 

Here are just a few preventable problems associated with prolonged bad weather exposure during outdoor winter months storage.

• Internal mould build up.

• Plexi Glass turns milky, scratches or crazing.

• Paint goes dull.

• Cracking of tyres.

• Damp starting from bottom up.

• Damp in walls.

• Corrosion to gas and electric appliances. 

Our Caravan Bubbles are the ultimate protection for your prized investment.

Designed around the same core principles as Auto Bubble Air, with the exceptions of use of a non transparent hard wearing outdoor materials and side access entry door.  

Caravan Bubble intended design is to: 

• Isolate from outside air.

• Push out any moisture through vents.

• Stabilise and keep humidity low.

• Protect from damage.

Caravan Bubble key features:

• Water proof.

• Powered by 2 brushless air circulating fans 12v 10w each.

• Long term use removes existing moisture and damp. 

• Made from UV resistant 0.8mm PVC coated heavy Tarpaulin.

• Heavy duty plastic zips.

• Frost proof.

• Side entry panel with window.

• Easy to put up and fold down.

• Number of eyelets and straps around the base and top to stabilise the bubble during high winds or tie down when not inflated.

• All upper joints are heat welded for extra strength and water repelling.

• Suitable to be powered by solar panel and a battery. 

• Non transparent, keeping valuables away from view.

 What to expect and how to use.

•  Position the Caravan Bubble on hard flat surface, ideally concrete, tarmac or similar. If using the product on soft or stoned surface use additional ground sheet and spreader plates at points where caravan touches the ground to avoid damage due to base movements.

• Plug in and inflate the Caravan Bubble empty to make sure its final position is suitable.

• Be careful to note the fan is not obstructed.

• Deflate the bubble and unzip the base from upper part. Use weights to keep the base from being blown away by wind.

• Position Caravan / Motorhome on the base and pull the upper part over. Be sure not to catch any aerials or other sharp and protruding parts of the roof. Ideally use steps.

• When upper part is in place, zip the 2 parts together.

• Power up the fan and watch the bubble inflate.

• Leave all windows slightly ajar so that air can circulate removing any moisture.

• Access to the caravan can be through side panel.

Our Caravan Bubble is fully customisable, we can add logo, vehicle registration, change the side access panel location or change dimensions slightly. If you have any questions or requests please get in touch, our details can be found on Contact Us page.